|
Stand Alone Taping Station
RUFF has designed a
low cost standardised taping station in order to replace the oneway
specail and expensive double head machine. it is a flexible taping
system that can be placed next to existing toroidal winding machines
and therefore enables simultaneous winding and taping of transformers
in the most economical method. The head is mounted on a ground palte
which sits on sliding rails and enables to slide the head easily into
the core. It incorporates the RUFF modular system and can be equipped
with interchangeable heads. One or more working stations can be
combined with a winding machine.
Technical Specifications
Controller
|
Integral with 1 Electronic Counter
|
LED Display
|
Continuous Read out of Turns Counted
|
Presets
|
1 Preset for Loading Turns
1 Preset for Taping Turns
|
Programming
|
Instant Set-up
|
Data Memory and Output
|
10 Years with NV-Ram
|
Taping Speed
|
Upto 250 RPM
|
Core Drive
|
Not Required as the Core Drive is Given
From Toroidal Winding
Machines which is Placed Next to
|
Pitch Control
|
Operator Dial Knob
|
Core Reverse Control
|
Not Required As this is Given From
Toroidal Winding Machines which
is Placed Next to
|
Accelleration
|
Controlled by operator speed knob
|
Deceleration
|
Controlled by Operator Speed Knob
|
Stops for Taps
|
Individual Operator Control
|
Single Taping Operation
|
Operator Controlled by using the Core
Transport System of The
Toroidal Winding Machine
Which is Placed Next to
|
Simulataneous Taping
& Winding Operation
|
Operator Controlled by Directing the
Taping Station and a Winding Machine with a
Speed Knob (Only
Possible When the Taping Station is Bought
Together with a winding Machine)
|
Winding Head Drive
|
Electronic Controlled
3-Phase Motor 2, 36 AMP, 0.55 KW
|
Supply Voltages
|
230 (110 & 240) Volt 50/60 HZ AC
|
Machine Size and Weight
|
1.100 x 700 MM 170 KG Net, 270 KG Gross
|
|
